Stainless Steel Elbow Basic Introduction - Stianless Steel Pipe Fittings.

Elbow Basic Introduction

This is the introduction of stainless steel elbow basic. Stainless steel elbow purpose: to connect two pipes with the same nominal diameter to make the pipeline bend.

Stainless steel elbows are very suitable for areas with high pressure, corrosive conditions and vibration. These elbows can be made of stainless steel of different ionic grades and designed at different angles to direct the liquid flow to a specific direction for uninterrupted flow to the destination. They are widely used in pipeline installations in many industries to achieve smooth and continuous flow. These elbows are made of the highest quality SS, which is non-reactive to chemicals and can ensure the supply of pollution-free water to commercial and residential premises.

Nominal Diameter		Outside Diameter at Bevel		Center to End				Center to Center			Back to Face
				45° Elbow	90° Elbow		180° Elbow
				B	A		O			K
DN	NPS	Series A	Series B	Long Radius	Long Radius	Short Radius	Long Radius		Short Radius	Long Radius A		Short Radius A
15	1/2	21.3	18	16	38	–	76		–	48		–
20	3/4	26.9	25	19	38	–	76		–	51		–
25	1	33.7	32	22	38	25	76		51	56		41
32	1.1/4	42.4	38	25	48	32	95		64	70		52
40	1.1/2	48.3	45	29	57	38	114		76	83		62
50	2	60.3	57	35	76	51	152		102	106		81
65	2.1/2	76.1(73)	76	44	95	64	190		127	132		100
80	3	88.9	89	51	114	76	229		152	159		121
90	3.1/2	101.6	–	57	133	89	267		178	184		140